Features of the Ceramic Peterson Real-Fyre Gas Logs: 

• Radiant Heat Chamber
  Many Real-Fyre styles feature the Radiant Heat Chamber. Laboratory tests prove Real-Fyre Gas Logs with interior Heat Chambers not only radiate more heat more efficiently...they also ensure a cleaner burn.

• Steel Reinforcing Rods
  To further add to the integrity of Real-Fyre Gas Logs, precisely sized and designed steel rods are inserted into each log. This provides maximum reinforcement and prevents breakage.

• Superior Materials
  Real-Fyre gas logs are made of superior refractory ceramics, expanded shales and aggregates and use an advanced calcium aluminate binder. This combination of materials, pre-fired in a rotary kiln, provides:

• Greater compressive strength
  Allowing finer detailing in the log making process without breaking or chipping, and producing a longer lasting log.

• Higher bulk density
  Providing more radiant heat, both while in operation, and after the set has been turned off, especially when compared to gas logs made with vacuum formed fibers.

• Better rheology (flow rate)
  Meaning a better texture to the logs, fewer bug holes, better strength, and less water in the mix, for better consistency of product.

• Higher refractoriness
  All Real-Fyre Gas Logs are made with a  refractory material that has a Pyrometric Cone Equivalent of 2650 degrees (F), higher than any other log and higher PCE means better ability to withstand heat over time. Our logs won’t break down.

• Lower iron content
  Other materials have 50-900% more iron! Iron turns to iron oxide and changes the color of logs.
  Real-Fyre Gas Log Systems are accepted by most national and local building codes and authorities, and are available with one or more of the following listings or certifications: C.S.A., C.G.A., R.A.D.C.O., I.C.B.O., B.O.C.A.