Do you have a draft problem in your fireplace, stove or furnace that you just can't cure?  Badly proportioned corner fireplaces and see-through fireplaces almost always have drafting problems.  Other fireplaces, stoves and furnaces may have problems due to incorrect chimney sizes or fireplace openings that are too large.  The list goes on and on but now there is a solution to all of these problems. 

     The Exhausto Fan is the ultimate solution to your drafting problems in fireplaces, stoves, BBQ's, furnaces and more.  It can be used with almost any type of fuel including wood, gas, oil, coal, or pellets.  The Exhausto Fan (also known as a Draft Inducer) can be used on masonry chimneys, prefab chimneys (using an adaptor), and even on horizontal direct vent fireplaces for example.  With the Exhausto Fan you no longer have to re-build your chimney, close down your fireplace, or rush to add logs to your smoking wood stove.  By creating a mechanical draft in the venting system the Exhausto Fan increases the capacity and efficiency of your venting system. 

The Exhausto Fan mounts to the top of your chimney's flue, where it literally sucks the smoke from the flue.  It's motor is completely enclosed and maintenance free with air-cooled, pre-lubricated, sealed ball bearings.  It comes with a pre-wired junction box that will need to be mounted to the chimney, a fan speed control similar to a dimmer switch to be installed near the fireplace, and a bird screen to keep out pests.  The Exhausto Fan is designed for minimum energy use consumption, using about as much energy as a regular light bulb.  Made of 3/16" thick cast aluminum and stainless steel these Draft Inducers are made to last and extremely corrosion resistant.