NPS40 Pellet Stove Heater by Napoleon

To Order Call Toll Free 888-443-1010	Gas Logs, Fireplaces, and More	Quality Products Low Price Guarantee
Contact Us	COMPANY INFORMATION
.85

Napoleon NPS40 Pellet Stove Heater

The freestanding stove conveniently provides zone heating furnace performance while the insert easily converts your existing, drafty, masonry fireplace into an efficient, reliable heating source. Each model gives you uncompromising pellet performance year after year with the comfort of knowing you have selected a product made from true craftsmanship with advanced technological innovations.

Due to current demand for Pellet Vent Stoves and Inserts, these units could take 12 to 16 weeks for delivery. Acquisition problems in acquiring the burner system for this stove product are holding up completion of these units.

ORDERING OR INFORMATION - CALL 888-443-1010

Installation Manual | Literature

Call for SPECIAL Internet Pricing!!

Shown with OPTIONAL decorative PHAZER™ ceramic log set


Optional hopper extension increases pellet capacity to 100lbs to reduce re-fueling periods.	Convenient ash pan door allows clean removal of ashes	Maximum performance, seamless heat exchange tubes

Features

Full BTU range from 8,000 to 43,000 (may vary depending on pellet quality)

Convenient top, front pellet loading for easy fueling

Automatic ignitor

Variable speed auger and variable speed blower provide maximum comfort and control

Heavy-duty, 1/8” thick, seamless heat exchange tubes radiate heat into the room even after the stove is shut down

High velocity and strategically positioned burn pot features aerodynamic pellet distribution creating full, active YELLOW DANCING FLAMES™

Four stage FAILSAFE™ system for your peace of mind, featuring an automatic blower over-ride switch, high temperature limit switch, low air pressure switch and power failure safety shut down

Easy push open access control panel

Hinged door for convenient access to combustion chamber for routine maintenance... no tools required!

Handy burn pot removal tool/rake

Built-in heat exchange cleaner rod maintains cleanliness and efficiency of heat exchange tubes

Extra large capacity ash pan for convenient, easy ash removal and maintenance

Convenient, easy and clean ash pan removal

Zone heating home furnace

Clean glass air wash system

President’s Limited Lifetime Warranty

Accessories

Optional decorative PHAZER™ ceramic log set

Hopper extension

Outside air kit with through the wall vent

Optional doors and decorative trivets available in 24 karat gold plated, satin chrome or painted black

* Note: For optimum performance, it is recommended that 4" diameter venting be utilized in high altitude regions (above 4,000 ft.) or when vertical venting exceeds 15 ft.

Specifications	NPS40
BTU Output	8,000-43,000
Hopper Capacity	55 lbs
Area Heated (Sq. ft.)	Up to 2,000
Burn Rate* (lbs/hr)	1-5
Burn Time* (low burn)	55 hours
Flue Diameter	3"
Electrical Rating	115 Volts 3.6 Amps, 60Hz
Mobile Home Approved	Yes
Blower Kit Available	Included
THIS HEATER HAD BEEN TESTED TO ASTM E 1509, UL 1482, ULC S627

CLEARANCES (must be installed on a non-combustible floor protector extending 6" in front and both sides)
Corner	Rear	Sides
2"	3"	6"
THIS HEATER HAD BEEN TESTED TO ASTM E 1509, UL 1482, ULC S627

Dimensions

For Information or Ordering please call Toll Free
1-888-443-1010

Link Resources